Automatic car gear changes can be a bit tricky for first timers. In this article, we’ll show you how to change gears in an automatic car while driving.
How automatic gears work
Automatic gears work by using a planetary gear system. When you change gears, the planetary gear system shifts the torque from one of the engines to another. This system allows you to change gears without having to take your hands off the wheel.
How to change gears manually in an automatic car
In an automatic car, changing gears is usually done by pressing a button on the gear stick. However, there are times when you may have to change gears manually. In this article, we will show you how to change gears manually in an automatic car.
First, locate the gear stick. It will likely be on the left side of the steering wheel or on the dashboard. Next, find the “gear shift” button. This will likely be a small button with a “+” symbol on it. Pressing this button will switch between neutral and each of the other gears.
The Different Gears Automatic Cars Use
Changing gears in an automatic car can be a little confusing, but there are generally three different gears that you’ll need to change depending on the terrain you’re driving on.
1st Gear: This is the lowest gear, and is used for driving on flat ground. It’s also the gear that your car will start in when you first turn the key.
2nd Gear: This is the middle gear, and is used for cruising along at a medium speed. It’s also the gear that your car will cruise in when you’re not actively braking or accelerating.
3rd Gear: This is the highest gear, and is used for accelerating or braking. It’s also the gear that your car will cruise in when you’re braking hard.
What to do if your Automatic Car won’t Change Gears
If you’re driving an automatic car and it won’t change gears, there are a few things you can do. First, check to see if the gear is engaged by looking for a gear light or feel for the gear shift lever. If the gear is engaged, you may need to reset the car’s computer. To do this, turn off the car, wait five seconds, then turn on the car and try to engage the gear. If that doesn’t work, you’ll need to take your car to a mechanic.
Gear changes can be a challenge while driving, but with a little preparation and practice, you’ll be able to do them smoothly and safely. Before you start changing gears, make sure the car is in park and turn off the ignition. Next, shift into first gear by pushing in the clutch pedal and pull the handbrake handle up. After that, release the clutch pedal and push in the gas pedal until your car is moving forward. Now shift into second gear by doing exactly what you did for first gear, only this time instead of releasing the handbrake handle, keep it pulled up until your car stops moving. Finally, shift into third gear by pushing in the clutch pedal and pulling on the handbrake handle until your car comes to a stop. You’re now ready to drive!