Best car gear guide

How to Change Car’s Gear

Changing gears on your car can sometimes feel like a chore, but with the help of this guide, you’ll be able to do it in no time at all. By following the step-by-step instructions, you’ll be able to change gears like a pro in no time!

What is a Gearbox?

A gearbox is a mechanism that assists in the transmission of power from the engine to the wheels. It contains different gears that allow the car to move forwards or backwards, as well as rotate around its vertical axis.

Types of Gears

There are many types of gears in a car. The most common type is the gearbox, which takes the power from the engine and turns it into rotational movement for the wheels. Different gears help to make the car go faster, slower, or stay in a particular spot on the road.

Another type of gear is the differential. This gear helps to keep the vehicle from spinning out while driving. It also helps to distribute power among the various wheels.

Finally, there are the brakes. A car’s brake system uses different gears to stop the vehicle quickly. Depending on how hard you press on the pedal, the car will use either its front or rear brakes.

How Gears Work

The gears in a car work together to move the car forward or backwards, turn it left or right, or stop it.

The gears are attached to the axle of the car and rotate as the car moves. The gearbox houses all of the gears, and sends power to the different gears according to how much power is needed.

Gearboxes and Transmissions

If you’re looking to change your car’s gearbox or transmission, there are a few things you need to know. Here are some tips on how to do it:

1. Decide what you need to change

The first thing you need to do is decide what you need to change. This includes figuring out what type of gearbox or transmission your car has, as well as the particular part that needs replacing.

2. Get the right tools and parts

Next, you’ll need the right tools and parts. You’ll need a Gearbox Removal Tool (GRM) and a Transmission Removal Tool (TRM), as well as some new gears if you’re replacing the gearbox or transmission. You’ll also need a Torque Wrench in the range of 35-80 ft-lbs, a JB Welder, some New Gears, Lube, and a Fluid Cap for your Sunoco / Mobil 1 Gear Oil.

3. Start by removing the wheel and tire

Before starting any work on your car, it’s important to remove both the wheel and tire. This will make it easier to get at the screws that hold the gearbox or transmission in place. Use a

How to Change a Gearbox

In a car, the gearbox is responsible for shifting gears. It’s a machine that contains all of the necessary gears to get your car moving.

If you’re looking to change your gearbox, there are a few things you need to know.

First, you’ll need to find your gearbox. You can typically identify it by looking for the engine cover and the transmission cover. Most gearboxes are located in the rear of the car.

Second, you’ll need to unscrew the gearbox cover. Make sure to remove all of the screws before doing so.

Third, you’ll need to remove the gearbox itself. Be very careful when removing it; don’t lose any components! Once the gearbox is free, replace it with the new one. Reinstall the cover and screws and you’re done!


Changing a car’s gear can be a daunting task, but with the right information and technique, it can be easy. In this article, we are going to walk you through the steps necessary to change your car’s gear. We will discuss how to identify the gear you need to change, as well as provide step-by-step instructions on how to do so. So whether you’re changing your own gears or helping someone else do so, make sure that you have the information needed in order to get the job done successfully.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *