Best car gear guide

How to Change Car Gear

Changing car gears can be a daunting task for the uninitiated. It’s not always easy to get your car into first or reverse, and it can take a lot of muscle memory to get the process down pat. But don’t worry, we’re here to help. In this article, we’ll show you how to change your car gear in just a few simple steps.

What are the Different Gears in a Car?

When you’re driving a car, there are different gears that you need to turn in order to move the vehicle forward or backward. Your car’s transmission can have up to 8 gears, and each gear corresponds to a certain amount of rotation per minute.

Here’s a breakdown of the different gears in your car:

1st Gear – This is the lowest gear, and it corresponds to a rotation rate of 1/60th of a second.
2nd Gear – This gear is twice as fast as 1st gear, and it has a rotation rate of 1/30th of a second.
3rd Gear – This is the fastest gear in your car, and it has a rotation rate of 1/15th of a second.
4th Gear – This is the next fastest gear, and it has a rotation rate of 1/8th of a second.
5th Gear – This is the slowest gear in your car, and it has a rotation rate of 3/10ths of a second.
6th Gear – This is the third slowest gear, and it has a rotation rate of 2/10ths of a second.
7th Gear – This is the second slowest gear

How to Change Gear in a Car

Gear changes are one of the most frequent repairs for car owners. Changing a gear can be a great way to save wear and tear on your car’s transmission and increase efficiency. Here are five tips to help you change your gears smoothly and without issue.
1) Check Your Gearshift Lever
The first step is to check your gearshift lever, or shifter. Make sure it’s in the correct gear and moves freely up and down. If it’s not working correctly, you may need to replace it.
2) Lubricate Your Gearshift Shifter
Next, lubricate your gearshift shifter using a small amount of oil or grease. This will help prevent noise and friction from causing problems with your gearshift.
3) Apply Pressure When Moving Your Gearshift Shifter
When you’re ready to move your gearshift, apply pressure with both hands on the shift knob at the same time. This will help avoid any Problems with the gears shifting.
4) Use Your Test Drive To Confirm Gears Are Correctly Changed
Before driving your car, make sure all the gears are in their correct positions by following these steps: Start in first gear, put your foot on the brake, and hold down the gas pedal

How to Check Gear in a Car

If you’re having trouble getting your car to shift gears, it’s time to check your gear. Here’s how:

1) Park the car in neutral and turn the key to the off position.
2) Remove the transmission pan cover by unscrewing 2 screws on each side.
3) Check the 3rd and 4th gears by looking down into the gearbox from above. The 3rd gear should be close to the top of the “C” shaped notch and the 4th gear should be at the bottom of the notch. If either one is off-center, use a screwdriver to adjust it until it’s in-line with the notch.
4) Replace the pan cover and screws, then turn the key to the on position and test drive your car. If everything is in-line, replace your transmission oil (see below).


If you’re like most drivers, your car’s gear shifter is probably not the most user-friendly thing on the planet. In this article, we’ll show you how to change car gear in just a few easy steps. Whether you need to change gears while driving or want to learn how to do it properly for when you repair or service your car, our guide will have everything you need. So be sure to check it out!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *